Zero Division

The BOX-ANT602 antenna is an antenna compatible with most Boxx TV products. 

Connects the BOX-ANT505 panel antenna to a receiver via the RP-SMA connectors.

Connects the BOX-ANT505 panel antenna to a receiver via the RP-SMA connectors.

Allows the Boxx Meridian to be connected to a computer for firmware upgrades and technical improvements.

Connects the Skydreams AirPaint system to a Sony RCP.

Full Telemetry RCP Extension CAT 5 Adaptor Cable.

12-pin Male (Plug) and 3.5mm Audio Jack to 12-pin Female (Socket) Lens Control Cable.

4-pin male XLR to 4-pin male Hirose cable.

8-pin male Hirose to 8-pin male Hirose cable.

3-pin Female (Socket) XLR to 3-pin Male (Plug) XLR cable.

4-pin Male (Plug) Hirose to 4-pin Male (Plug) Lemo cable 50cm.

One of most useful pieces of equipment for any microwave installation. Clamps onto poles up to 50mm in diameter and flat surfaces up to 35mm thick and can be used for permanent installation or for any fast deployment application.

To be used as a stable mounting solution if adaptable mounting unneccessary.
8mm Socket w/ 3/8" thread, 8mm thread length.

Alexa Anton Bauer Battery Plate Adaptor

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

The Universal Stand Adapter has a baby 5/8" (16 mm) stud with 1/4"-20 male thread on one side and a 3/8"-16 thread on the other. The round stud will fit into any 5/8" (16mm) receiver.