Zero Division

The 5-way Panel antenna is a 3 x 19dBi & 2 x 14dBi antenna in single panel housing, specifically designed for use with the Boxx Meridian Portable Receiver and the Boxx Atom Receiver.

Alexa Anton Bauer Battery Plate Adaptor

Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation. 

Connects the Skydreams AirPaint system to a Sony RCP.

Full Telemetry RCP Extension CAT 5 Adaptor Cable.

Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.

4-pin Male (Plug) Hirose to 4-pin Male (Plug) Lemo cable 50cm.

8-pin male Hirose to 8-pin male Hirose cable.

Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.

Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.

One of most useful pieces of equipment for any microwave installation. Clamps onto poles up to 50mm in diameter and flat surfaces up to 35mm thick and can be used for permanent installation or for any fast deployment application.

This bracket swivel adapter allows you to use an umbrella with the provided locking umbrella socket with shafts up to 3/8" or 9mm in diameter.

4-pin Hirose Male to 2-pin D-tap Male cable 40cm.

12-pin Male (Plug) and 3.5mm Audio Jack to 12-pin Female (Socket) Lens Control Cable.

Specifically designed for use with the Boxx Tally & Iris 2 Channel Transmitter.

BNC to BNC cable 40cm.