Zero Division

Alexa Anton Bauer Battery Plate Adaptor

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

The Universal Stand Adapter has a baby 5/8" (16 mm) stud with 1/4"-20 male thread on one side and a 3/8"-16 thread on the other. The round stud will fit into any 5/8" (16mm) receiver.

This bracket swivel adapter allows you to use an umbrella with the provided locking umbrella socket with shafts up to 3/8" or 9mm in diameter.

2 x 3-pin Male (Plug) XLR to 5-pin Female (Socket) Mini-XLR cable.

N-type Female to RP-TNC Female adaptor.

This whip, tilt antenna has a frequency range of 2.4GHz ~ 2.5GHz and connects via a RP-SMA male connector.

This whip, straight antenna has a frequency range of 2.39GHz ~ 2.49GHz and connects via an RP-SMA male connector.

Specifically designed for use with the Boxx Tally & Iris 2 Channel Transmitter.

Specifically designed for use with either the 818MHz or 914MHz Boxx Tally & Iris Control Receiver.

Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.

Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.

Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation. 

Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.

The BOX-ANT601 antenna is specifically designed for the Boxx Atom Transmitters.

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

N-type Male to N-type Male adaptor.