-
-
-
3dBi 5GHz RP-TNC, rubber duckie antenna. 14cm
£20.00Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna.
Learn More -
Universal Stand Adapter 3/8" to 5/8"
£5.00The Universal Stand Adapter has a baby 5/8" (16 mm) stud with 1/4"-20 male thread on one side and a 3/8"-16 thread on the other. The round stud will fit into any 5/8" (16mm) receiver.
Learn More -
Adjustable Tilt Arm
£50.00This bracket swivel adapter allows you to use an umbrella with the provided locking umbrella socket with shafts up to 3/8" or 9mm in diameter.
Learn More -
2 x 3-pin Male XLR to 5-pin Female Mini-XLR Cable
£10.002 x 3-pin Male (Plug) XLR to 5-pin Female (Socket) Mini-XLR cable.
Learn More -
5-pin Female XLR to 5-pin Female Mini-XLR Cable with 20dB Pad
£30.005-pin Female (Socket) XLR to 5-pin Female (Socket) Mini-XLR cable with 20dB pad. Learn More -
-
2.4GHZ 1/2 Wave RP-SMA antenna
£30.00This whip, tilt antenna has a frequency range of 2.4GHz ~ 2.5GHz and connects via a RP-SMA male connector.
Learn More -
2.45GHZ 1/4 Wave RP-SMA antenna
£25.00This whip, straight antenna has a frequency range of 2.39GHz ~ 2.49GHz and connects via an RP-SMA male connector.
Learn More -
868MHZ 1/2 wave RP-SMA antenna
£35.00Specifically designed for use with the Boxx Tally & Iris 2 Channel Transmitter.
Learn More -
868MHZ right angle 1/4 wave RPSMA antenna
£25.00Specifically designed for use with either the 818MHz or 914MHz Boxx Tally & Iris Control Receiver.
Learn More -
19 dBi 5GHz 20 degree N-type antenna
£75.00Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.
Learn More -
13dB 5GHz patch 50 degree N-type antenna
£50.00Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.
Learn More -
10dB 5GHz omni directional N-type antenna
£295.00Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation.
Learn More -
5.5dB 5GHz RP-TNC rubber duckie antenna. 30cm
£80.00Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.
Learn More -
5dBi 5GHz RP-SMA antenna.14cm
£20.00The BOX-ANT601 antenna is specifically designed for the Boxx Atom Transmitters.
Learn More -
3dBi 5GHz RP-SMA, rubber duckie antenna. 9cm
£20.00Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna.
Learn More -
-
N-type Female to N-type Female adaptor
£15.00N-type Female (Socket) to N-type Female (Socket) adaptor.
Learn More