Zero Division

The 5-way Panel antenna is a 3 x 19dBi & 2 x 14dBi antenna in single panel housing, specifically designed for use with the Boxx Meridian Portable Receiver and the Boxx Atom Receiver.

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

The BOX-ANT601 antenna is specifically designed for the Boxx Atom Transmitters.

Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.

Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation. 

Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.

Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.

Specifically designed for use with either the 818MHz or 914MHz Boxx Tally & Iris Control Receiver.

Specifically designed for use with the Boxx Tally & Iris 2 Channel Transmitter.

This whip, straight antenna has a frequency range of 2.39GHz ~ 2.49GHz and connects via an RP-SMA male connector.

This whip, tilt antenna has a frequency range of 2.4GHz ~ 2.5GHz and connects via a RP-SMA male connector.

N-type Female to RP-TNC Female adaptor.

N-type Male to N-type Male adaptor.

N-type Female (Socket) to N-type Female (Socket) adaptor.

N-type Male (Plug) to RP-TNC Female (Socket) adaptor.

N-type Male (Plug) to N-type Male (Plug) Right Angle adaptor.

N-type Male (Plug) to RP-TNC Male (Plug) Adaptor.

N-type Male (Plug) to N-type Female Right Angle (Socket) Adaptor.

N-type Male (Plug) to RP-SMA Female (Socket) Adaptor.

RP-TNC Female (Jack) to RP-SMA Male (Plug) Adaptor.

BNC to BNC cable 40cm.

4-pin Hirose to 4-pin Hirose cable 40cm.

4-pin Hirose Male to 2-pin D-tap Male cable 40cm.

3.5mm Stereo Headphone Jack to 5-pin Mini-XLR Female (Socket) cable.