Zero Division

Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation. 

12-pin Male (Plug) and 3.5mm Audio Jack to 12-pin Female (Socket) Lens Control Cable.

Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.

Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.

2 x 3-pin Male (Plug) XLR to 5-pin Female (Socket) Mini-XLR cable.

This whip, straight antenna has a frequency range of 2.39GHz ~ 2.49GHz and connects via an RP-SMA male connector.

This whip, tilt antenna has a frequency range of 2.4GHz ~ 2.5GHz and connects via a RP-SMA male connector.

3-pin Female (Socket) XLR to 3-pin Male (Plug) XLR cable.

3.5mm Stereo Headphone Jack to 5-pin Mini-XLR Female (Socket) cable.

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

Good all round short antenna with a 90 degree knuckle, allowing the operator to adjust position and polarisation of each antenna. 

4-pin Hirose Male to 2-pin D-tap Male cable 40cm.

4-pin Hirose to 4-pin Hirose cable 40cm.

4-pin Male (Plug) Hirose to 4-pin Male (Plug) Lemo cable 50cm.

4-pin male XLR to 4-pin male Hirose cable.

Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.

To be used as a stable mounting solution if adaptable mounting unneccessary.
8mm Socket w/ 3/8" thread, 8mm thread length.

The BOX-ANT601 antenna is specifically designed for the Boxx Atom Transmitters.