-
Boxx 5-way Panel Antenna
£500.00The 5-way Panel antenna is a 3 x 19dBi & 2 x 14dBi antenna in single panel housing, specifically designed for use with the Boxx Meridian Portable Receiver and the Boxx Atom Receiver.
Learn More -
-
10dB 5GHz omni directional N-type antenna
£295.00Can be used on either a transmitter or a receiver. Particularly useful when the transmitter and receiver are on the same ground elevation.
Learn More -
-
Full Telemetry RCP Extension 3-pin XLR Adaptor Cables
£200.00Connects the Skydreams AirPaint system to a Sony RCP.
Learn More -
-
-
Full Telemetry RCP Extension CAT-5 Adaptor Cable
£125.00Full Telemetry RCP Extension CAT 5 Adaptor Cable.
Learn More -
5.5dB 5GHz RP-TNC rubber duckie antenna. 30cm
£80.00Good all round omni-directional antenna. Mainly used with the Boxx Meridian Broadcast Receiver and the Boxx Zenith Transmitter.
Learn More -
4-pin Male Hirose to 4-pin Male Lemo Cable
£80.004-pin Male (Plug) Hirose to 4-pin Male (Plug) Lemo cable 50cm.
Learn More -
8-pin Male Hirose to 8-pin Male Hirose Cable
£80.008-pin male Hirose to 8-pin male Hirose cable.
Learn More -
Data Rate Viewfinder LED
£80.00Allows the cameraman to know the quality of the link at all times when transmitting. Learn More -
19 dBi 5GHz 20 degree N-type antenna
£75.00Designed for mounting on top of an Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver. The antenna has a N-type female connector and uses ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zenith Broadcast Receiver.
Learn More -
-
-
-
-
13dB 5GHz patch 50 degree N-type antenna
£50.00Designed for mounting on top of a Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver. The antenna has a N-type female connector and uses BOX-ADP106 to connect to the Boxx Cobalt, Boxx Meridian or Boxx Zentith Broadcast Receiver.
Learn More -
The Super Clamp
£50.00One of most useful pieces of equipment for any microwave installation. Clamps onto poles up to 50mm in diameter and flat surfaces up to 35mm thick and can be used for permanent installation or for any fast deployment application.
Learn More -
Adjustable Tilt Arm
£50.00This bracket swivel adapter allows you to use an umbrella with the provided locking umbrella socket with shafts up to 3/8" or 9mm in diameter.
Learn More -
4-pin Hirose Male to 2-pin D-tap Male Cable
£45.004-pin Hirose Male to 2-pin D-tap Male cable 40cm.
Learn More -
12-pin Male and 3.5mm Audio Jack to 12-pin Female Lens Control Cable
£40.0012-pin Male (Plug) and 3.5mm Audio Jack to 12-pin Female (Socket) Lens Control Cable.
Learn More -
868MHZ 1/2 wave RP-SMA antenna
£35.00Specifically designed for use with the Boxx Tally & Iris 2 Channel Transmitter.
Learn More -
-
2.4GHZ 1/2 Wave RP-SMA antenna
£30.00This whip, tilt antenna has a frequency range of 2.4GHz ~ 2.5GHz and connects via a RP-SMA male connector.
Learn More